MICRO-EPSILON scanCONTROL2800, Инструкция по эксплуатации

Страница: 6 / 42

MICRO-EPSILON
X9751109-B060097MSC 6
1.3 Information on CE Marking
The following applies to the scanCONTROL28x0 measurement system:
EU Directive 89/336/EEC
Products which bear the CE mark satisfy the requirements of the EU Directive 89/
336/EEC "Electromagnetic compatibility" and the harmonized European
standards (EN) listed in it.
The EU declaration of conformance is kept available for the responsible
authorities according to the EU Directive, Article 10, at
MICRO-OPTRONIC MESSTECHNIK GmbH
Lessingstraße 14
D-01465 Langebrück
The measurement system is designed for use in the industrial field and fulfills the
requirements according to the standards
• EN 55011 Class B /05.200
Emitted interference
• EN 61 000-6-2 /08.2002 Immunity to interference
The measurement system fulfills the requirements when the guidelines described
in the operating manual are followed during installation and operation.
1.4 Proper Use
• The scanCONTROL 28x0 measurement system has been designed for
application in the industrial and laboratory fields.
• It is employed for
- Profile measurement
- Quality monitoring and inspection of dimensions
• The measurement system may only be operated within the limits
specified in the technical data (see Chap. 3.2).
• It must be used such that with malfunctions or total failure of the sensor,
no persons are put in danger nor machines damaged.
• With safety-related applications additional precautions must be taken
for safety and for the prevention of damage.
Safety