MICRO-EPSILON optoCONTROL 1202, Инструкция по эксплуатации

Страница: 29 / 36

Page 29 optoCONTROL 1202
6.6 RESET Function, IN1
When a HIGH-pulse of less than 750 ms duration is applied at input IN1, see Fig. 14 , the RESET function is
performed at the receiver. This resets the current maximum and minimum values. If the receiver detects a
RESET pulse, the yellow LED at the housing of the receiver blinks shortly one time , see Fig. 15 .
6.7 TEACH Function, IN1
When a HIGH-pulse of more than 1.5 s duration is applied at Input IN1, see Fig. 14 , the TEACH function is
performed at the receiver. If the receiver detects a TEACH pulse, the yellow LED at the housing of the receiver
blinks shortly three times.
Time [s]
Digitalinput IN1
+U
B
0 V
T < 0.75 s
R
T > 1.5 s
T
Reset Teach
Fig. 14 Pulse duration at digital input IN1 decides about Reset- or Teach function
On: Visualization operating voltage
1 x shortly blinking: Reset- max/min function
3 x shortly blinking: Teach function
Fig. 15 Yellow multifunction LED on the receiver