Page 8
optoCONTROL 1202
2.
Laser Class
The optoCONTROL 1202 sensor operates with a semiconductor laser with a wavelength of 670 nm
(visible/red). The maximum optical output is ≤ 0.39 mW. The sensors are classified in Laser Class 1 (Class I).
The accessible radiation is harmless under predictable conditions.
The following warning labels are attached to the cover of the sensor housing:
Class 1 Laser Product
IEC 60825-1: 2008-05
THIS PRODUCT COMPLIES
WITH FDA REGULATIONS
21CFR 1040.10 AND 1040.11
IEC label
Only for USA
Impairment of color vision and inconvenience may not excluded for class 1 laser devices, e. g. through glare.
Consequently, you can use Class 1 laser equipment without further protective measures.
Class 1 lasers are not subject to registration and a laser protection officer is not required.
The laser warning label for Germany is included in delivery. The version applicable to the user’s country must
be applied before the equipment is used for the first time.
i
The housing of the transmitter and receiver may only be opened by the manufacturer! For repair and
service purposes the sensors must always be sent to the manufacturer!
Receiver
Transmitter
Laser beam
THIS PRODUCT COMPLIES
WITH FDA REGULATIONS
21CFR 1040.10 AND 1040.11
Class 1 Laser Product
IEC 60825-1: 2008-05
Fig. 1 True reproduction of the sensor with its actual location of the warning labels, view on top side
If both information
labels are hidden in
the installed state, the
user must ensure that
additional labels are
fitted at the point of
installation.
