24
from MCS-Magnum’s keypad the keypad/LCD of a live unit.
1. To get authorized on Magnum do the following:
2.
Press ‘Menu’
3. Using
,
,
, or
position curser to ‘Passwords’
4. Press
key.
5. Enter 4 digit password & press
.
6.
Press ‘Menu’ to make next selection.
The following steps will display the Bacnet Device ID:
(to change the address you first must be authorized)
1. \Press the MENU key and then Using
,
,
, or
position curser to Serv Tools then press the ENTER key.
2. then Using
,
,
, or
position curser to Bacnet Setting then press Enter.
3. Use
,
, curser to change the Bacnet Device ID.
4. Set your desired address then press Enter.
5.
Reset or cycle power to the magnum for the change to take effect.
The MCS-MAGNUM IP must be set to the address specified on the MCS-BMS-GATEWAY’s label
(Example - 192.168.18.101). Range of default settings: 101-150
The MCS-MAGNUM IP address can be verified and changed (with the proper authorization code) from the
MCS-Magnum’s Keypad/LCD of a live unit.
The following steps will display the IP Address settings:
(to change the address you first must be authorized)
6. Press the MENU key and then Using
↑
,
↓
,
, or
position curser to Serv Tools then press the ENTER key.
7. Then Using
,
,
or
position curser to Serv Tools then press Enter.
8. Then Using
,
,
, or
position curser to Ethernet Network then press Enter.
9. Then Using
↑
,
,
, or
position curser to IP address then press Enter.
10. Using
,
to increase and decrease the first set of values then use the
to select the next set of num-
