Micro-Air, Inc.
Page 37
EasyTouch 2.5 Operations Manual
Rev 1.0 8/27/14
Figure 40
– Fault History Display Screen
NOTE:
The Fault History is an excellent troubleshooting tool and can only have maximum
effectiveness if the Date & Time are set correctly. See section 13 for more information on
how to properly set the Date & Time.
16.2 Compressor Run Hours
The Compressor Run Hours displays the number of hours the fan has been operating as shown in
Figure 41. The value can be cleared by pressing the CLR button. Once cleared, the number of
operating hours begins accumulating again from 0. Pressing and holding the CLR button for 10
seconds will reset the Compressor Run Hours to the total hours accumulated for the lifetime of the
display. Although the displayed hours are cleared, the lifetime hours are always being maintained in
the background and cannot be cleared.
Figure 41
– Compressor Run Hours Display
Figure 42
– Fan Run Hours Display
16.3 Fan Run Hours
The Fan Run Hours displays the number of hours the fan has been operating as shown in Figure 42.
The value can be cleared by pressing the CLR button. Once cleared, the number of operating hours
begins accumulating again from 0. Pressing and holding the CLR button for 10 seconds will reset the
Fan Run Hours to the total hours accumulated for the lifetime of the display. Although the displayed
hours are cleared, the lifetime hours are always being maintained in the background and cannot be
cleared.
NOTE:
The Fan Run Hours display is a completely separate timer value maintained and stored
separately from the Filter Reminder (Fan) Hours. The two timers are completely
independent. See section 11.1.9 for more information on the Filter Reminder.