MICRO-AIR EasyTouch Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 39

background image

Micro-Air, Inc.

Page 28

EasyTouch 2.5 Operations Manual

Rev 1.0 8/27/14

The Program Scheduler Menu consists of 10 items on 4 pages as show in Figure 18.

Figure 18

– Program Scheduler Menu Screens

12.1 Mode Control and Operational Behaviors

The Scheduler Mode parameter allows the Program Scheduler to be enabled (ON) or disabled (OFF,
default). As soon as the Program Scheduler is enabled, it will immediately begin apply the programs
as defined for the current day of the week.

The Schedule status display on the Main screen will indicate which day of the week and which
program is currently in effect. For example, if the Schedule status displayed

is “

WED P1

”, this

indicates Program #1 for Wednesday is in effect. If the Program Scheduler is disabled, the Schedule
Status always sh

ows “

MANUAL

”. Lastly, if the set point temperature or operational modes are

altered in anyway via user input while the Program Scheduler is operating, it will immediately yield
and display the status of “

OVERRIDE

”. The override condition will remain in effect until the beginning

of the next Program number or Day of the Week. For example, if the Program Scheduler goes into
override mode at 6PM on Wednesday, and the next program is set to begin at 10PM on Wednesday,
the Program Scheduler will remain in override until 10PM.

NOTE:

The Program Scheduler requires an accurate date and time setting in order to function
properly. If the date and time have not already been set, refer to section 13 for more
information.

12.2 Programming a Day or Group of Days

Each Day of the week has 4 programs, and each program has a mode of operation, time, cooling set
point, and heating set point (if dual set points are enabled). The 4 programs are accessed by
pressing the SCROLL DOWN button.  The Mode choices are OFF, COOL, HEAT, AUTO, and
DEHUMIDIFY.   If Dual Set Points is selected, the cooling set point is settable for COOL and AUTO
operation, and the heating set point is shown and settable for HEAT and AUTO mode operation.  Set
points are not settable for OFF or DEHUMIDIFY modes.  Pressing the buttons for the Mode, set point,
hour, minute, and AM/PM allow each item to be adjusted individually and saved.  Figure 19 shows
and example day of the week and program number.

«
...
26
27
28
29
30
...
»

Содержание EasyTouch








































Отзывы:

Нет отзывов

Похожие инструкции для EasyTouch

Бренд: Vacon Страницы: 62

Бренд: UNITED Страницы: 8

Бренд: 7bit Страницы: 2

Бренд: Jafar Страницы: 15

Бренд: Baccara Страницы: 16

Бренд: BABYSTYLE Страницы: 8

Бренд: BABYSTYLE Страницы: 32

Бренд: IBM Страницы: 38

AMES 4000SS Series

Бренд: Watts Страницы: 8

CIATControl OPC Server

Бренд: CIAT Страницы: 32

Бренд: Danfoss Страницы: 8

Infi 90 IMAOM01

Бренд: Bailey Страницы: 44

Бренд: baby joy Страницы: 11

DIGITAL EPIC-2 DTM

Бренд: Westlock Страницы: 33

Бренд: IDTECK Страницы: 51

Бренд: ccei Страницы: 16

Бренд: Schell Страницы: 16

Бренд: Brooks Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды