8
9
Veri-Q PREP M16 G2-16TU
User Manual
2.2.5
Do not use a loose power cable or connector. If a power cable is overheated, it may be
damaged and can cause fire or electric shock.
2.2.6
Do not damage or alter the power plug. It may cause electric shock or fire.
2.2.7
When using a power extension cable, do not operate multiple devices at the same time. It
may cause an overload and cause a fire.
2.2.8
When handling a power cord, please handle it with hands that are completely dry.
Warning
Risk of Electric Shock
Do not touch G2-16TU with wet hands.
2.2.9
Do not place any objects in front of the door of the product which can interfere with the
door. It may lead to the malfunction of the door.
2.2.10
Have at least 30 cm of space between the product and the wall for proper ventilation. If
not, the product may be damaged.
Warning
Risk of Overheating
Maintain a space of a minimum of 30 cm for proper ventilation.
2.2.11
Do not install the product in a dusty environment since it may damage the product.
2.2.12
Make sure the product does not come in contact with heat sources.
2.2.13
Keep the product away from humid environment since it can cause electric shock, fire or
damage to the system.
2.2.14
Keep the product away from combustible and flammable vapor. If gas leaks, open the
windows and ventilate.
Do not operate electric switch during a gas leak because it may cause an explosionor fire. The
device must be installed on a clean and level place. A place with corrosive gas or high density
magnetic properties can damage the device.
2.2.15
Do not dismantle or repair the product. It may cause a fire and electric shock, and warranty
will not apply. Only a designated engineer can provide repair and services.
2.2.16
When the product is not used for a prolonged period of time, turn off the switch and
unplug the power plug. If not, the product may overheat and cause a fire.
2.2.17
Wipe off the dust from the power plug and do not use a loose power cord. If not, it may
cause a fire.
2.2.18
The optimum operating temperature of the product is 15
℃
~ 40
℃
. If the temperature is
higher or lower than this, it may damage the device or generate inappropriate data values.
2.1.5
If the device does not meet the performance conditions, make an inquiry to the
manufacturer.
2.1.6
This device is an electronic and mechanical device. Since there is a risk of electric shock or
physical injury, you must operate the device according to the user manual.
2.1.7
Follow the safety precautions attached to the device.
2.1.8
Do not touch the switch or power with wet hands.
2.1.9
When cleaning the device, turn off the power and unplug the power cord.
2.1.10
Only a designated engineer can provide repair and services.
2.1.11
Please install the device on a clean and level surface. Corrosive gas or high density
magnetic location can damage the device.
2.1.12
Avoid direct sunlight and strong light.
2.1.13
You must wear safety gear when handling toxic substances and substances which cause
infection.
2.1.14
Please close the door when operating the device. When you take out the door during
operation, physical shock may be applied to the device and cause malfunction of the operating
part, and you may also receive physical injury.
2.2 Working Environment and Installation Method
2.2.1
Please check the rated voltage of the power before operating the product. Veri-Q PREP M16
– G2-16TU uses 220V. For the safe use of the product, we do not recommend the use of Automatic
Voltage Regulator (AVR) or uninterruptible power supply (UPS) . This device is an electronic and
mechanical device. Since there is a risk of electric shock or physical injury, you must operate the
device according to the user manual.
2.2.2
This product must be grounded to protect it from electric shock. If not, it may cause a
serious injury or damage to the device.
2.2.3
Electromagnetic environment must be evaluated before operating the product.
2.2.4
Do not use this device near a powerful electromagnetic radiation source.
For example, unshielded intentional RF source may intefere with normal operation.
Warning
Electrical Hazard
Any interruption of the internal protective conductor (ground/grounded lead) and
disconnection of the protective conductor or external terminal may cause risk to
the product. Intentional interruption is prohibited.
Voltage inside the device
When the product is connected to line power, terminal may be active. If the cover
is opened or parts are removed, it is highly likely that active parts can be exposed.
