Michigan Instruments LIFE-STAT 1008MII, Инструкция по эксплуатации

Страница: 11 / 48

REV: 2019-04 11
2.3.2 Controls and Labeling
The Life-Stat
®
controls are located on the back of the Arm.
Figure 6
1. SYSTEM CONTROL (Control#1): This membrane keypad is used to control the Life-Stat
®
. It
is comprised of 5 electronic buttons, described below.
START/ON button.
Pressing this button will activate the electronic control module
and perform a self test. The green LED indicator next to the button will illuminate to
indicate that the unit is on after completion of a successful self test.
STOP/OFF button. Pressing this button will return the chest compressor piston to the
‘up’ position, turn off the ventilator and shut down the electronic control module.
30:2 button. Pressing this button will activate the 30 compressions to 2 ventilations
operating mode and the blue LED indicator next to the button will illuminate.
CCV button.
Pressing this button will activate the Continuous Compressions/
Ventilations operating mode and the blue LED indicator next to the button will
illuminate.
PAUSE button.
Pressing this button will return the chest compressor piston to the ‘up’
position and pause compressions. Ventilations will continue and the yellow LED
indicator next to the button will illuminate. To resume compressions, press the desired
mode button (30:2 or CCV).
LOW BATTERY indicator. The red LED indicator will illuminate when the battery
voltage is too low to sufficiently power the device. When the power level reaches a
critical stage, an auto shutdown will bring the chest compressor piston to the ‘up’
position; turn off the ventilator and the electronic control module.
Control Panel