MHS Boilers ADI LT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 20 / 59

ADI LT boiler - Technical Manual Page
L338 11/2011
20
10.6 AVAILABLE PARAMETERS THAT CAN BE ADJUSTED BY THE FINAL USER
Press the button T6 or T7 , to accede directly to the programming
level “final user”.
Select the required line by pressing the buttons T6 and T7,
, the display will show “Pxxx”
Adjust the required value by pressing the buttons T8 and T9, .
The adjusted value will be saved when changing line.
Press the button T2 to get out of the programming level.
Changes won’t be saved.
Press the button T10 to get out of the programming level. Changes will be saved.
If nothing changes after 8 minutes or any other button has been pressed, you will come back to the initial display
and changes won’t be saved.
If you go to another level or line, changes will be automatically saved.
Line
Function
Adjustment
range Unit Resolution Value by
default
1
Current time 0 ... 23:59 h / min 1 min ---
5
Boiler reduced set-up temperature TRN ºC 0.5 69.0
Time
programming
11
Time program Heating circuit 1: phase 1, start-up time 00:00... 24:00 hh:mm 10 min 06:00
12
Time program Heating circuit 1: phase 1, stop time 00:00... 24:00 hh:mm 10 min 22:00
13
Time program Heating circuit 1: phase 2, start-up time 00:00... 24:00 hh:mm 10 min 24:00
14
Time program Heating circuit 1: phase 2, stop time 00:00... 24:00 hh:mm 10 min 24:00
15
Time program Heating circuit 1: phase 3, start-up time 00:00... 24:00 hh:mm 10 min 24:00
16
Time program Heating circuit 1: phase 3, stop time 00:00... 24:00 hh:mm 10 min 24:00
31-36
Not available : Time programs of D.H.W.S. circuit 00:00... 24:00 hh:mm 10 min 06:00
45
Standard time programs for heating
(press simultaneously T8 and T9, , during 3 seconds)
No / Yes ---- ----- No