MHS Boilers ADI LT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 59

ADI LT boiler - Technical Manual Page
L338 11/2011
17
10. CONTROL PANEL - SIEMENS
The boiler control panel is placed in the upper part of the boiler front.
ITEM Concept
1
Button for boiler reset (T1)
2
Not operational: Select D.H.W.S. circuit (T2). D.H.W.S. on/off
3 Select heating circuit 1 (T3). Change the operation mode:
Automatic mode: Circuit 1 works according to time program 1
Permanent nominal mode according to the circuit setpoint , adjustment by default.
Permanent mode according to reduced setpoint
Standby: circuit 1 disconnected, anti-freezing function activated .
4 Adjust boiler set-up flow temperature (T4)
5 Not operational: Adjust D.H.W .S. set-up temperature
6
Button to change the line of the display that you want to select
(T6)

to go down, (T7)

to go up.
7
8
To modify the values of adjustment of the parameters on the display,
To decrease (T8), and to increase (T9)
9
10 Access to the available information
11
Display of data and operation modes
12 Function maintenance, stop controller (press simultaneously switches 4 and 5)
To go to the initial display, press T2
(A)
(11)
(A) Boiler on/off switch (11) Display: readings, messages, errors...