MHP JNR4DD Series, Инструкции по сборке и обслуживанию

Страница: 30 / 40

Maintenance & Tube Bending
General Maintenance
Sear Magic Grid System Care
For best results, preheat the grill for 10 minutes.
1. Use a brass bristled brush to clean top rungs.
2. Use the supplied “Forked Grid Tool” to clean the valley are-
as between the main rungs. Simply run the tool back and
forth with enough pressure to remove the debris. For heavy
build-ups you can use a plastic scouring pads.
Do not use
abrasives like steel wool pads or caustic cleaners such
as oven cleaners. They will damage the grid surface and
void your warranty.
3. If a grid gets a slight bow, lay it on a flat surface and apply
pressure to the ached area. This will flatten the grid to its
original configuration.
Note: Over time the grids may change color slightly.
This is normal and will not effect the grids performance
or durability.
Stainless Steel Cleaning
(TJK, Optimum Console)
Before Cleaning, determine which way the “grain” of the
metal runs and always clean with the grain. NEVER USE
STEEL WOOL PADS TO CLEAN STAINLESS STEEL.
1. Routine cleaning is done with a warm soapy water applied with
a sponge or soft cloth. Always rinse with clean hot water and
wipe dry with a soft cloth. Glass cleaners like Windex also
works well.
2. Stubborn stains can be removed with a mild non-scratching
abrasive household powder. Add a small amount of vinegar to
the scouring powder to increase its potency.
3. Commercial stainless steel cleaners and polishers also work
well, such as MHP’s Stainless Steel Cleaner (Part #SSC).
Note: Over time the stainless steel will turn a mild gold
patina from the grill’s heat. This is normal .
FLEXIBLE STAINLESS STEEL GAS TUBE BENDING
30