MHP JNR4DD Series, Инструкции по сборке и обслуживанию

Страница: 18 / 40

JNR & WNK Assembly Instructions
Step 4: Attaching the Grill Lid
(Fig. 30)
1. Attach the grill lid to the grill head bottom using the two Hinge
Pins and Hinge Clips.
Step 5: Connect the Handle
(Fig. 31)
1. Attach the handle to the grill lid using two ¼ - 20 x 1 ½" Hex
bolts with Kep nuts. Graphite Gaskets are positioned be-
tween the end caps and grill lid as shown in
fig. 31 . Use two
7/16" wrenches, one to hold the bolt head and one to tighten
the nut.
Step 6: Grates, Briquettes and Cooking Grids
(Fig. 32)
1. Place the one piece Briquette Grate on the shelf edge just
above the burner.
2. Carefully place the Porcelain Briquettes on the grate in the
pattern shown. Use only one layer.
3. Place the two Cooking Grids above the Briquette Grate
.
Step 7: Warming Rack
1. The JNR Warming
Rack rests in the
notches on the top
edge of the grill
head bottom.
(Fig.
33)
2. The WNK and TJK swing-away Warming Rack connects to the
grill lid and the grill head bottom. First, insert the right Top and
Bottom Rods into
their respective
mounting holes on
right side of the
grill lid and grill
head bottom. Then
slide the RACK to
your left, position-
ing the left Top and
Bottom Rods into their respective mounting holes simultane-
ously. The Lower Right Rod End can then be “popped” into
place by flexing it inward.
(Fig. 34)
Before using your grill, leak test all gas line connections.
And follow the lighting instructions. See page 23.
18
Porcelain
Rock