Mhouse RT3N, Инструкции по установке и использованию, предупреждения

Страница: 3 / 136

English – 1
EN
WARNINGS
PRODUCT DESCRIPTION AND APPLICATIONS
— STEP 1 —
• MHOUSE disclaims responsibility for any damage resulting from uses of the
product other than those described in this manual.
• Protect the product’s internal components from contact with water and
other polluting substances. Keep it away from heat sources and do not
expose it to open flames. If any of these conditions occur, stop using it
immediately and call MHOUSE customer service.
• Disconnect the power supply before proceeding with the installation opera-
tions.
• The packing materials must be disposed of in compliance with local regu-
lations.
— STEP 2 —
The RT3N kit consists in a STX1 transmitter and RC1 receiver, and enables
the user to control single-phase asynchronous motors powered by electrical
mains, with connections such as “COMMON”, “OPEN” and “CLOSE”. The
RT3N is used for automations for awnings, rolling-shutters and similar
devices.
The RC1 receiver (figure 1) operates at a frequency of 433.92 MHz with
rolling code technology thus ensuring high safety levels. Each receiver can
memorize up to 30 transmitters of the “STX1” (figure 2) or “GTX4” (figure 3)
series.
After each command of the transmitter, the motor is powered for the oper-
ating time required (factory setting approx. 150 sec). A limit switch incorpo-
rated in the motor stops the movement when the desired position is
reached.