MHG Heating Ltd ©
MHG Heating Ltd. Unit 4 Epsom Downs Metro Centre, Waterfield Tadworth Surrey KT20 5LR
P: 08456 448802 F: 08456 448803 E:[email protected] W:
www.mhgheating.co.uk
01/01/10
56
15. Installation of sensors
The sensor is installed in the immersion sleeve next to the collector supply line at
position (F). Therefore, remove the rubber stopper from the immersion sleeve and
lead the cable carefully through the stopper. Then insert sensor into the immersion
sleeve completely as far as it will go and put the rubber stopper back into the
frame of the collector.
The line that leads from the collector to the hot water storage tank is called supply
line.
The line that leads from the storage tank to the collector is called return line.
The supply line always hotter than the return line.
