MHG Heating Ltd ©
MHG Heating Ltd. Unit 4 Epsom Downs Metro Centre, Waterfield Tadworth Surrey KT20 5LR
P: 08456 448802 F: 08456 448803 E:[email protected] W:
www.mhgheating.co.uk
01/01/10
36
Mounting of the quickies 4
Please consider the measures (E) and (F).
The measure (E) should not exceed 50 cm, measure (F) should be 5 cm wider than
the distance between the profile bars. This will make the mounting on the roof
easier.
According to the on roof installation break out the two draining slots on each of
the two lower left and right corners of the collector frame. Use a slotted
screwdriver for this and put it on bottom edge of the draining slots to break slots
out.
To ensure that the collector could get drained it is necessary that all draining slots
at the both lower left and right corners of the collector frame are broken out
(according to the collector position on the roof)!
Before the collectors are mounted, put the L stop profile 10 into the lower
opening of the C-profile and securely fastened with T-headed screws.
Important!!!
Screw the L-stop profile tightly! Otherwise, the collectors could be misaligned.
