7
24.11.14 / V 01.0-EN
7. General Handling
a. Security
b. Working Direction
Using our hand guided milling machines, always work
against the direction of rotation of the milling head
('up-cut milling').
This means to observe the working direction from
left to right in case of plate working starting in front
at the top
and clockwise in case of working on bore holes or
channels.
c. Bore Diameter or Inner Radius
In order to avoid a hooking of the cutting plates on
starting the beveling of bore holes, the bore hole
should always be at least 1.5 fold of the guide
bearing.
In case of guide bearing of 45° milling machine the
bore diameter is thus 30 mm x 1.5 = 45 mm.
Considering sufficient inner radius for beveling of
inner radius is also very important for safe working!
General Information
For all maintenance machine must
be disconnected from the
power supply system!
