24
24.11.14 / V 01.0-EN
24.
Adjusting the radii:
The lateral position of the radius
to the side of the workpiece is determi-
ned by the guide bearing fitted.
Cutting a lager plate with a plasma cutter may
result in a 7° deviation of the upper and end faces
of the workpiece.
Depending on how the plate is milled
there can always be different cutting results.
So if you want to mill a radius R3 mount
the sleeve H15-R3-5 and then adjust the
height of the guide plate.
Customize a test piece and corret the
height adjustment.
The guide plate always closes with the
end of the radii plate.
Radius
