MGE UPS Systems Comet 100 kVA, Инструкция по установке и эксплуатации

Страница: 43 / 66

The English language is used by default. Other languages
available are:
• French
• Spanish
• German
• Italian
• Dutch
To select a language:
• Press the SHIFT key until the following is displayed on
the alphanumeric display.
ENGLISH
• Each successive press of the SHIFT key changes the
language used by the Comet.
• Press the ENTER key to confirm the display language.
• Press any other key to cancel the modification.
After selecting the display language, you will be asked to set
the contrast:
CONTRAST
• Each successive press of the SHIFT key alters the
contrast of the display.
• Press the ENTER key to confirm the contrast.
• Press any other key to cancel the modification.
Typically, the Inverter is configured for automatic start-up
mode. For manual start-up mode configuration, contact MGE
Customer Support Services.
For manual start up:
• Press the green "Inverter ON" pushbutton.
• The green "Load Protected" LED flashes.
• The Inverter starts and if the transfer conditions are
correct, the load is transferred to the Inverter.
• The red "Load Not Protected" LED goes off.
• The green "Load Protected" LED goes on.
• The alphanumeric display reads:
LOAD PROTECTED
3.3.5 Inverter Manual
Start-Up Mode
3.3.4 Adjusting the
Contrast
3.3.3 Selecting the
Language for the
Display
86-160310-00 3 — 7 Operation
Installation and Users Manual