MGE UPS Systems Comet 100 kVA, Инструкция по установке и эксплуатации

Страница: 17 / 66

Voltage (inverter only): 480 ± 1% VAC (steady-state conditions)
480 ± 5% VAC (transient conditions from
0% to 100% or 100% to 0%)
Frequency: 60 Hz ± 0.1% (free-running)
Phases: 3 Ø (phase sequence must be A, B, C, clockwise)
Wires: 3 wires, plus ground (480-480 VAC only)
Current: @ 480 VAC
40 kVA 50 kVA 65 kVA 80 kVA 100 kVA 125 kVA 150 kVA
48A 60 A 78 A 96A 120 A 150 A 180 A
Power factor: 0.8 linear load
Total harmonic distortion (THD): <2% (linear load)
<3% (for 100% non-linear load with a crest factor
of less than 3.0)
Dynamic regulation: ± 1% for balanced load
± 2.5% for 100% unbalanced load
Dynamic response: ± 8% for 100% step load change
Overload: 105 - 110% of rated current for 10 minutes
110 - 130% of rated current for 1 minute
130 - 150% of rated current for 10 seconds
>150% of rated current for 0.15 seconds
Battery voltage (25° C): float 490 Vdc
nominal 432 Vdc
minimum 361 Vdc
Maximum Current at cut-off voltage:
40 kVA 50 kVA 65 kVA 80 kVA 100 kVA 125 kVA 150 kVA
98 ADC 123 ADC 160 ADC 197 ADC 235 ADC 294 ADC 353 ADC
1.2.3 DC Ratings
1.2.2 AC Output Ratings
86-160310-00 1 — 7 Introduction
Installation and Users Manual