Meyra SPRINT GT 2.593, Руководство по эксплуатации

Страница: 5 / 44

5
If drive mode is switched off (brake re-
lease lever in the "push" position) the
wheelchair cannot be operated and
braked via the joystick! In this event, use
the brake release lever (shift to the
"drive" position). – Danger of acci-
dents!
!
Attention:
Please observe the Safety Instruc-
tions!
Although the wheelchair conforms with
the statutory EMV regulations, it can
cause unintentional interference noise if
operated in the vicinity of sensitive elec-
tronic equipment (e.g. buzzing, hum-
ming).
The wheelchair can also interfere with
electromagnetic fields, e.g. such as
those emitted by shop anti-theft systems.
!
Attention:
Mobile telephones and other radio
equipment should only be used when
the wheelchair is stationary (control
box switched off) for reasons of safe-
ty.
Braking the wheelchair
The wheelchair stops when you let go of
the joystick. Always ensure an adequate
braking distance when applying the
wheelchair brakes.
+
Remark:
Depending on the nature of the driving
surface and speed, the shortest braking
distance is:
approx. 1 m for the 6 km/h version
andmin. of 1.5 m for the 10 km/h ver-
sion.
For this reason, ensure that you brake
the wheelchair in good time when you
encounter other people or obstacles.
! Attention:
Braking the wheelchair when
traveling downhill at high speed can
cause it to skid. – Danger of acci-
dents!
• When traveling downhill, select a
low speed!
• Avoid jerky adjustments to driving
status when negotiating hills, trans-
verse slopes and obstacles.
• Especially avoid tight turning and
jerky braking on inclines with critical-
ly set driving parameters.– Danger
of overturning!
• Before performing maintenance
work, dismantling/mounting parts or
adjusting the settings on the wheel-
chair, push the brake release lever
to the "drive" position and switch off
the control box! – Accident risk re-
sulting from inadvertent movement of
the wheelchair!
DRIVING BEHAVIOR
Drive especially carefully during your
first journey!!
Bearing this in mind, set the pre-selecta-
ble final speed to the lowest setting.
Press the minus key [24] on the key field
of the control box (see 'Pre-operation
Checks').
!
Attention:
Please observe the Safety Instruc-
tions!
You determine the speed and driving
direction yourself when driving through
the movement of the joystick [35] and
the maximum top speed setting of your
wheelchair.
When reversing with the joystick leaning
to the left, your wheelchair makes a
right turn.
A reversal of the steering direction is,
with certain manoeverabiltiy restrictions,
possible by reprogramming..
+
Negotiating curbs
Curbs can be negotiated with the
detachable curb aid Code 862.
Please observe the operating man-
ual which is supplied with Code
862.