1
2
33
SEAT
Seat pad
The seat pad [1] is attached to the seat plate
with velcro straps and can be removed for
cleaning and maintenance.
Replace and attach the seat pad again after
cleaning or maintenance [1]. – Velcro fasten-
er.
Seat cushion
The seat cushion is placed with the burling
side onto the seat plate.
Seat inclination
!
Attention:
Only adjust the seat angle [2] when
the electric wheelchair is standing on
a horizontal, level surface. A danger of
tipping over exists on gradients!
•
The seat-angle adjustment is not linked
with an automatic speed reduction
function.
•
An increased danger of tipping over ex-
ists with a reclined back support.
•
Before driving make sure that you have
not adjusted a negative seat inclination,
resp. that the seat inclination ensures a
safe sitting position even while driving
on hills/slopes.
Electrically adjusting the seat angle
The seat inclination [1] is administrated
through the operating module or a sepa-
rate adjustment module.
☞
Note:
Therefore observe operation manual
<
Operating module
>.
