manualshive.com logo in svg

Meyra 1.617, Руководство по эксплуатации

Поделиться
Скачать
Meyra 1.617 Скачать руководство пользователя страница 11

   11

HANDLING THE ELECTRIC 

WHEELCHAIR

Securing the electric wheelchair

The electric wheelchair is to be secured as 
follows to prevent it from rolling off unin-
tentionally:

1.  Switch the selection lever for drive-/

push mode on both sides outward to 
drive mode on both sides.

2.  Switch off the operating module.

Functional checks

The functions and safety of the electric 
wheelchair must be checked before the 
start of each journey.

 

☞

For this observe chapter < 

Inspections 

before starting to drive

 > in the accom-

panying documentation.

Driving

You define the speed and direction yourself 
with the joystick movements (driving and 
steering lever) while driving as well as the 
preadjusted maximum final speed of your 
electric wheelchair.

BRAKES

Service brake

The motors work electrically as operating 
brake and carefully brake the electric wheel-
chair down without jerks to stillstand.

Braking the wheelchair

For allotted braking of the wheelchair slow-
ly guide the joystick (steering and driving 
lever) back to the centre position (zero-set-
ting).

 

☞

The electric wheelchair stops in short-
est distance after releasing the joysticks.

Parking brake

The parking brakes are only effective when 
the selection lever drive-/push mode is set 
to drive mode on both drives. They disen-
gage automatically when the wheelchair 
starts off.
The parking brakes are manually disen-
gaged by switching the selection lever 
drive-/push mode on both drives to push 
mode.

Содержание 1.617

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды