manualshive.com logo in svg

Meyra 1.617, Руководство по эксплуатации

Поделиться
Скачать
Meyra 1.617 Скачать руководство пользователя страница 26

2

1

4

3

26   

Removing the electrically height adjust-

able leg support

In order to remove the leg support, depend-
ing on version, first pull the locking lever (1) 
back, press it in or fold it up or down.
Afterwards swivel the leg support sideways 
and remove it toward the top [2].

 

☞

Therefore observe chapter 

Turning the 

leg supports to the side

 on page 21.

!

 

Attention:

When the electrically height adjustable 
leg supports are removed the electric 
contact (3) needs to be protected from 
dampness, water and dust or dirt (e. g. 
for longer storage)!

 

☞

Possible function error of the elec-
trical adjustment.

 

☞

For protection you can for example 
use the optional cover cap.

Hanging the electrically height adjusta-

ble leg support into place

 

☞

Note:

After attachment swivel the leg sup-
ports inward.

 

☞

Therefore observe chapter 

Swivelling in 

the leg supports

 on page 22.

Press the leg supports, swivelled to the side, 
parallel to the front frame tube and lower 
it into place. – In doing so the holding pin 
must slide into the frame tube (4).

 

☞

Conduct a function test on the electri-
cally height adjustable leg support!

Содержание 1.617

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды