manualshive.com logo in svg

Meyra 1.617, Руководство по эксплуатации

Поделиться
Скачать
Meyra 1.617 Скачать руководство пользователя страница 16

1

2

16   

Pre-operation checks

Before starting to drive, the following should 
be checked:

 

☞

the battery charging condition,

 

☞

the setting of the preselected final 
speed.

 

–

For this observe the operating manual 
< 

Operating module

 >.

Battery charging procedure

 

☞

For the battery charging procedure also 
observe the operating manual of the 
battery charger.

1.  Lock the electric wheelchair.

 

☞

For this observe chapter 

Securing 

the electric wheelchair

 on page 11.

2.  Insert the charger plug into the battery 

charging socket (1) of the operating 
module.

!

 

Attention:

Do not insert any objects other than 
the battery charger plug into the bat-
tery charging socket.

 

–

 – Danger of short circuit!

3.  Switch the battery charger on, resp. 

insert the main plug of the battery 
charger into the corresponding power 
socket.

 

☞

The charging procedure is initiated.

 

☞

The charging procedure only runs 
with a completely depressed safety 
button (2)!

4.  After a completed charging procedure 

disconnect the battery charger from 
the socket and remove the battery 
charging plug from the battery charg-
ing socket.

Содержание 1.617

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды