Meva MGC-F, Техническое руководство по эксплуатации

Страница: 11 / 30

MGC-F
w
11
Technical Instruction Manual / May 2022
MGC-F
10’-6”
10’-6”
Climbing bracket e
MGC-F Varies, usually
= 8‘-0“
Table 11.1
Recommended distance e
1
Fig. 11.3
Fig. 11.4
Fig. 11.5 Fig. 11.6
23“
Climbing shoe MGC
Climbing shoe MGC with swivel-guide
(The climbing shoe can also be remove
from below. In this case the climbing shoe
MGC without swivel-guide will do.)
23“
10’-6”
1
1
2
2
2
2
MGC
h =
Distance e
Fig. 11.2
23“
10‘ 6“ mm
Location and installation of the climbing cones
1st pour
The upper level is always
l o c a t e d 2 3 “ m i n i m u m
below the top of the pour.
Depending on the pour
height and the climbing
bracket equipment,the lower
level is located at distance
from “e
“ from the upper
climbing cone.
(Table 11.1).
Climbing shoe MGC with
swivel-guide
This type of climbing shoe is
used on the of the first two
shoe levels, see fig. 11.2
through 11.4. The platform
unit is suspended there.
The swivel-guide allows the
guiding profile extension to
be swivelled in.
Climbing shoe MGC
The pour 2 climbing shoe
MGC can be rigid or swivel.
see fig. 11.2.
Reference Ref. No.
Climbing shoe MGC .... 29-011-50
Climbing shoe MGC with
swivel-guide ..............
29-011-60
Guiding profile extension
MGC 400 .....................
29-007-60
MGC 325 ..................... 29-007-50
MGC 80 ....................... 29-007-30
MGC 55 ....................... 29-007-25
MGC 30 ....................... 29-007-20
Washer D40xD26x4, galv.,
DIN 1440-26 ................
29-412-78
Hexagonal screw M24x60,10.9
black, ISO 4017 ...........
63-119-48
2nd pour
Climbing cones are required
on two levels in order to
make sure the climbing
brackets are guided in the
climbing shoes (Fig. 15.3).
As with the 1st pour, the
upper level is located 23“
below the top of the pouring
height. The location of the
lower level
Climbing shoes should be
as large as possible, and still
allow the MGC-F without the
guide extension to be lifted
while remaining in two guide
shoes. This distance is usually
8‘-0“ or less, depending on
geometry. The smaller this
distance the greater the load
will be on the top anchor.
Note: MGC platforms may be
lifted and remain only in one
shoe level, but this means
a balanced 4 way or crane
compensator will be required
to keep platforms level.