Meva MGC-F, Техническое руководство по эксплуатации

Страница: 18 / 30

MGC-F
w
18
Technical Instruction Manual / May 2022
MGC-F
Guided Climbing
Assembly process
Step 1
For initial placement, set MGC foldable
brackets on flat 4x4 cribbing spaced
1/2” further apart than “A” distance.
Square brackets & attach two (2)
horizontal ledgers that are presized 1
1/2” shorter than “A” distance, to the
guiding profiles. Then attach turnbuckle
cross bracing.
Turnbuckle Bracing Color Code:
60 LH (Yellow-Head Blue)
70 LH (Yellow-Head Red)
80 LH (Yellow)
130 RH (Silver-Head Red)
180 RH (Silver-Head Yellow)
230 RH (Silver-Head Green)
280 RH (Silver)
Step 2
Place two (2) aluminum stringers
on MGC. Once proper cantilever is
established, attach with one (1) beam
clamp per crossing. After clamps are
tightened and the correct spacing/
cantilever is established, the lumber
deck and guardrails can be attached
Step 3
Place pre-assembled MGC foldable
platform near to its desired location.
Confirm that climbing shoe MGC’s
are securely affixed to concrete wall -
climbing shoes with swivel-guide are
attached to the first climbing section
to allow for guiding profile extension
to be brought into place.
1
2
3
Attach planks to joists w/ 1/4”X3” Spax
coated powerlags or equal. using T30 Bit
w/ 1/4” Impact Driver