100
ķ
• Set the desired EV value using the PLUS/MINUS buttons. The setting takes
effect immediately.
• Press the „Return“ button
to change the LC display back to the normal
view. If the „Return“ button
is not pressed, the display will change back
to the normal view after about 5 seconds.
6.5 Light sensitivity (ISO)
If there is no digital data transfer between the camera and flash unit, for
example with cameras from Group A (see table 1) or when using non-
CPU–capable lenses, the ISO can be manually set from 6 to 6400.
For flash modes
(automatic) and
(manual), the camera and flash
unit have to be set to the same ISO value.
Setting procedure:
• Press the „Para“ button (Parameters) until „ISO“ flashes on the LC display.
• Set the desired ISO value using the PLUS/MINUS buttons. The setting takes
effect immediately.
• Press the „Return“ button
to change the LC display back to the normal
view. If the „Return“ button
is not pressed, the display will change back
to the normal view after about 5 seconds.
During TTL flash mode, setting the ISO on the flash unit is only necessary to
achieve the correct distance range indication, not for the function of the flash.
6.6 Manual partial light output (P)
In the manual mode
and the strobe mode
, the light output can also
be adjusted to fit the shooting situation with the manual partial light output
parameter (P). Settings in manual flash mode M range from P 1/1 (full light
output) to P 1/256, in intervals of 1/3.
M
M
A
Setting procedure:
• Press the „Para“ button (Parameters) until „P“ appears on the LC display.
• Set the desired light output (1/1-1/256) with the PLUS/MINUS buttons.
The setting takes effect immediately.
• Press the „Return“ button
to change the LC display back to the normal
view. If the „Return“ button
is not pressed, the display will change back
to the normal view after about 5 seconds.
In strobe mode
, the maximum partial light output is automatically
adjusted to fit the flash parameters chosen.
In strobe mode
, reduction of the manual partial light output is
only possible in full intervals.
When the number of flashes (N) and the flash frequency (f) are reset,
the partial light output is not reset.
7. Special functions (Select menu)
Special functions are selected using the „Sel“ (Select) button. Depending on
the camera model and flash mode set, various special functions are availa-
ble. If certain special functions are not supported by your camera, these func-
tions may not be displayed in the menu. Also see table 2 for more informa-
tion.
7.1 Setting procedure for the special functions
When a button is pressed for the first time, the LC display is illumina-
ted.
• Press the „Sel“ key repeatedly until „Select“ appears on the display.
• Use the UP
and DOWN
arrows to select the item of your choice or
special function from the menu. The selected menu item will be highlighted
against a dark background.
☞
☞
☞
☞
706 47 0029-A3 58 AF-1 N 30.05.2007 8:05 Uhr Seite 100
