Metronic (Re)playBox, Руководство пользователя

Страница: 20 / 52

M
Satellite validation
For each satellite, you have now to memorise the right position in the motor. The
operation is done for Hotbird and Atlantic Bird 3, you have to do it for Astra, etc.
Example for Astra 19°E
• Go onto the Astra reference channel (301 = TV5).
• Go into the DiSEqC 1.2
(2)
menu and give a number
(6)
to Astra 19°E (03 if you
hesitate).
• By a continuing rotation
(4)
and then a step by step rotation
(5)
, make the motor spin to
obtain the maximum level and quality.
• Memorised
(7)
the position founded.
• Check that you receive the Astra channel. If it is not the case, that means that you
memorised another satellite, which emit some channels at the same frequency. Try the
operation above again and make sure that your satellite dish is pointed slightly on the
left from Hotbird like shown on the Diagram 17 underneath. Do the same operations
for the other satellites. For your information, the diagram 17, gives you the satellites
relative position for which some channels are pre-programmed in the metronic
receivers. When you receive all the satellites, screw definitively all the nuts. Your
installation is finished.
Note:
The Hispasat reception with a motorised installation is very difficult and need
a perfect alignment. For the perfect reception of this satellite, we advise a fixed
installation, with a particular look at the adjusting of the counter-polarization.
T
u
rksa
t
17
Reminder:
Atlantic Bird 3 =
ex Telecom 2C
«F» plug isolation
When your installation is finished, do not forget to protect the LNB connexion with
appropriate waterproof materials, isolation paste, or in defect, silicone (see picture § C
page 4).
N
18
(2)(4)(5)(6)(7
)
See the paragraphs on the page
9.
5
6