12
Connection
For the installation you will need 2 pie-
ces of cable. The first one, roughly 1,5m
(4,92ft) to go from the LNB to the motor,
the second one as long as it takes to go
from the motor to the receiver.
Prepare the cables and assemble the “F”
plug at the end of the cable.
Respect the dimension indicated on the
schema above; the plug must screw on
the aluminium foil roll up. Make sure that
none of the braid strand is in contact with
the central core of the cable.
Connect the receiver to the television
with a scart lead. Put the motor near
the receiver, on a table or on the floor,
and connect the receiver LNB input to
the Motor DEMO output with the 1,5m
(4,92ft) cable, then switch on the recei-
ver
(0)
.
����
����
Motor Horizon-Horizon
Ref. 450908
Motor
(Re)playBOX
S/N 3mm441550nnnnnn
• The motor will reinitialise while loo-
king for is reference position (Mechanic
east stop). The motor should stop at 45°
(at the nearest 10°). If it is not the case,
check the mechanical stop as indicated at
the end of this user manual. If the motor
does not spin, connect the motor to the
LNB with the long cable then reset the
motor.
To verify the right position of the mecha-
nic west stop, do a continuous spinning
(4)
towards the west. The motor should stop
at 45° (to within about 10°). If it is not the
case, check the mechanical stop (see insi-
de the motor user manual).
D
E
Reset the motor and checking of the stops
The reset of the motor is to reinitialise its position, and not to put him at 0°, which
means face south.
Go into the DiSEqC 1.2
(2)
menu and then reset the motor
(3)
(see pictures on the
opposite)
(0)(2)(3)(4)
See the paragraphs on the
page 9.
F
Содержание (Re)playBox
Страница 2: ......
Страница 40: ...NOTES 38 ...
Страница 51: ......
Страница 52: ...Node Park Touraine BP 1 TAUXIGNY 37310 REIGNAC SUR INDRE CEDEX FRANCE www metronic com Product made in Asia ...