METRON PS-416M, Руководство пользователя и обслуживания

Страница: 16 / 36

3-16
Lead Testing
ECG leads should be tested regularly. Connect each end of a lead to one
of the two Lead Test terminals. The display will flash if the lead is OK.
4. Rear Panel Connectors
Low-Level ECG Leads
There are ten AHA color-coded 4mm safety terminals located on the rear
panel. Snap-to-banana adapters for the terminals are supplied with the
PS-416M (P.N. 17023).
Battery Eliminator
METRON’s AC Adapter plug-in power supply transformer allows you
to use the PS-416M anywhere a standard electrical outlet is available. To
attach the AC Adapter insert the adapter’s small connector into the micro
jack labeled “Batt. Elim. 9V DC” on the right rear of the unit. Plug the
large connector into the nearest standard electrical outlet.
NOTE
Remove the batteries and
disconnect the AC Adapter
if you do not intend to use
the PS-416M for an ex-
tended period of time.