66. . Configuration
Configuration
726 Titroprocessor, Short Introduction
15
15
6 Configuration
6.1 Basic Configuration
The basic configuration is accessible from the main page by pressing the
[Config.] softkey.
Items to be configured:
Dialog in
not yet implemented in 5.726.0010 program version
(German, French and Spanish in 5.726.0011 pro-
gram version )
Date and Time
system date and time
LCD contrast
screen brightness
Screen save
delay time for screen switch-off
Error beep
acoustic error warning on/off
Edit beep
acoustic editor warning on/off
Edit mode
switches overwrite/insert mode
Data file options:
Each determination is automatically given a data file name. This file name
can be set up in different ways, combining determination time, run number
and/or a certain standard text that can be defined.
Standard data file name
standard text (up to 5 or 8 characters resp.)
File name type
combination type for file name
File comment type
combination type for file comment
The device header that will be printed with every report can be edited after
pressing the [Device header] softkey.
For information on the configuration of dialog restrictions (softkey [Access
control] see page XX.
Interface configuration
Two serial RS232 interfaces can be used for connecting external printers,
balances or computers/LIMS (or other peripheral devices). The interface
parameters are separated in two columns for interface 1 (Ifc.1) and interface
2 (Ifc.2). Always ensure that the interface settings correspond with those of
the connected devices.
Interface parameters:
Baud rate
transmission rate
Data bit
number of data bits used
Stop bit
number of stop bits used
Parity
type of parity checking
Handshake
type of handshake
