MD 9930 Thermal camera
Settings Menu
18
T.refl. – Reflected temperature:
set by selecting, then using
UP
and
DOWN
buttons. See chapter Reflected Temperature for more information.
Alarm temperature:
Use
SELECT
button to start adjusting the limit. Use
UP
and
DOWN
buttons to set the temperature, then
SELECT
again to confirm. To turn the
Alarm off, set Alarm temperature to OFF.
Alarm will sound when using the Hot measurement described in the chapter
Measure. It will automatically sense any object with temperature above the set limit
when camera is pointed at it. Alarm is indicated by a continuous beep and flashing of
the span meter on the screen.
When Range is set to Screening, the alarms are only valid above 36°C. Setting it
below results in continuous beeping. Use other ranges to set alarms outside body
temperature. See Chapter Temperature ranges for more information.
Image
Set properties of the viewed image.
Use
UP
and
DOWN
buttons to highlight Image in the Main menu.
Press
SELECT
button to open the submenu that contains the settings:
IR: displays only infrared information,
Visible: displays only visible light information,
Fusion: displays a mix of infrared and visible light information,
Figure 4: Menus for setting the emissivity, temperature compensation, alarm and reflected temperature.
Figure 5: IR, visual, fusion and AUF image settings
