MD 9930 Thermal camera
Operation details
13
Capture
The hot snap function is recommended for use with alarms. See the chapter Emiss
for information on setting the alarms.
Capture function saves the visible light and a reduced IR image without the
temperatures. Images snapped with this function cannot be anaylised or processed
later.
NOTE
: Images shot while Capture function is active do not contain analytical IR data
and cannot be analysed with Metrel IR Analyser! This includes both hot snapped
images and images shot using the trigger.
To use the Capture function:
1.
Insert SD card into the camera. This function doesn’t work with internal
memory.
2.
Set the limit temperature for alarm as described in chapter Emiss.
3.
Point the camera at the scene for measuring.
4.
If the temperature in the scene exceeds the alarm limit, the alarm will sound.
The visible light image and limited IR image with locations of Hot and Cold
markers will be automatically saved.
Metrel IR Analyser
Thermal camera report software Metrel IR Analyser is available online at Metrel
webpage. This software is intended for thermal camera and for analysing images,
organizing data and information, and making professional reports. Thermal camera
reporter software allows audio annotations and commentary to be reviewed on a PC.
