METREL EurotestPV Lite, Инструкция по эксплуатации

Страница: 61 / 75

MI 3109 EurotestPV Lite Data handling
61
6.6.2 Bluetooth communication
How to configure a Bluetooth link between instrument and PC
For Bluetooth communication with PC a Standard Serial Port over Bluetooth link for
Bluetooth dongle A 1436 must be configured first.

Switch Off and On the instrument.

Be sure that the Bluetooth dongle A1436 is properly initialized. If not the
Bluetooth dongle must be initialized as described in chapter
4.4.9
Communication.

On PC configure a Standard Serial Port to enable communication over Bluetooth
link between instrument and PC. Usually no code for pairing the devices is
needed.

Run the EurolinkPRO program .

The PC and the instrument will automatically recognize each other.

The instrument is prepared to communicate with the PC.
How to configure a Bluetooth link between instrument and Android device

Switch Off and On the instrument.

Be sure that the Bluetooth dongle A 1436 is properly initialized. If not the
Bluetooth dongle must be initialized as described in chapter
4.4.9
Communication.

Some Android applications automatically carry out the setup of a Bluetooth
connection. It is preferred to use this option if it exists.
This option is supported by Metrel's Android applications.

If this option is not supported by the selected Android application then configure
a Bluetooth link via Android device’s Bluetooth configuration tool. Usually no
code for pairing the devices is needed.

The instrument and Android device are ready to communicate.
How to configure a Bluetooth link between EurotestPV Lite instrument and Metrel
Powermeter

Switch Off and On the EurotestPV Lite instrument.

Be sure that the EurotestPV Lite Bluetooth dongle A 1436 is connected and
properly initialized. If not the Bluetooth dongle must be initialized as described in
chapter
4.4.9 Communication.

Switch On the Metrel Powermeter. A second Bluetooth dongle A 1436 should be
inserted to the Powermeter’s PS/2 port.

Be sure that the second Bluetooth dongle A 1436 is properly initialized (as
PowerQ device). If not the Bluetooth dongle must be initialized as described in
chapter
4.4.9 Communication.

The settings
in instrument’s Communication menu (see chapter
4.4.9
Communication) should be as following:
COM PORT: BT DONGLE
BLUETOOTH DEVICES: PowerQ

The EurotestPV Lite instrument and Powermeter are ready to communicate.