METREL EurotestPV Lite, Инструкция по эксплуатации

Страница: 22 / 75

MI 3109 EurotestPV Lite Instrument operation
22
4.4.4 Initial settings
In this menu the instrument settings, measurement
parameters and limits can be set to initial (factory)
values.
Figure 4.8: Initial settings dialogue
Keys:

/

Selects option [YES, NO].
TEST Restores default settings (if YES is selected).
ESC Exits back to settings menu.
Function selector Exits back to main menu without changes.
Warning:

Customized settings will be lost when this option is used!

If the batteries are removed for more than 1 minute the custom made settings will
be lost.
The default setup is listed below:
Instrument setting Default value
Language English
Contrast As defined and stored by adjustment procedure
Communication RS232
Clamp settings
CLAMP 1
CLAMP 2 A 1391, 40A
A 1391, 40A
Accessories Test cable
Solar settings See chapter 4.4.10 Solar Settings
Function
Parameters / limit value
Sub-function
ISO
RISO+, RISO- No limit
Utest = 500 V
ENV. Measured
I/V Measured
INVERTER AC/ DC
AUTO No limit
Utest = 500 V
Note :

Initial settings (reset of the instrument) can be recalled also if the TAB key is
pressed while the instrument is switched on.