Metos Kodiak 30 VL-1C, Руководство пользователя

Страница: 11 / 16

11
A
C
B
e
rror codes and possible solUtions
:
For some errors, the control system will show an error code in the display:
User pressed without raising the bowl to working height.
Solution:
Raise bowl to working height.
User pressed
without fitting the safety guard.
Solution:
Fit the safety guard.
The Thermal sensor in the motor has overheated.
Solution:
The error will disappear when the temperature has dropped to an acceptable level.
Stop the mixer and reduce the quantity of ingredients in the bowl. When it starts again, select a lower speed .
There is an error in communication between the control panel and the frequency converter.
Solution:
Call the engineer.
Error in frequency converter.
Solution:
Call the engineer.
Thermal sensor in the frequency converter has cut out.
Solution:
The error will disappear when the temperature has dropped to an acceptable level.
Intermittent low voltage in the power supply.
Solution:
The power supply to the mixer should be checked by an expert.
Intermittent high voltage in the power supply.
Solution:
The power supply to the mixer should be checked by an expert.
The mixer is overloaded because of excessively heavy dough etc.
Solution:
Reduce the quantity in the bowl; the product may need to be reduced or thinned before the machine is restarted.
When it starts again, select a lower speed.
a
ccess to the fUse
:
If the fuse burns out, it can be replaced without the aid of technical staff.
•
The fuse is located in the socket on the back of the machine.
•
Remember to remove the mains cable before changing the fuse.
•
The fuse can be changed by pulling out the little ‘drawer’
(A) on top of the socket (B). If the fuse has gone, it can be
replaced with the spare fuse (C).