10
d
isplay
of
mixer
data
Number of mains connections and control panel and frequency converter software version:
• When the machine is connected to the mains, three values will be displayed in the text field on the panel:
•
Number of times the machine has been connected, e.g.
for three times
• Control panel software version; first
is displayed, then the version, e.g.
for version 26
• Frequency converter software version; first
is displayed, then the version, e.g.
for version 18
Running time and error log
It is possible to display the time the machine has been on (the motor has been running):
•
Hit emergency stop and press
next to
.
•
Time displayed in hours: 0 - 1 - 2 etc.
•
Deactivate emergency stop to cancel the display.
It is possible to display a log of the errors that have occurred:
•
Hit emergency stop and press
next to
.
• The display shows the latest error first.
•
To scroll back through the errors, press
next to
; to scroll forward, press
next to
.
•
The last eight errors can be displayed.
•
Deactivate emergency stop to cancel the display.
Part
Action
Frequency
Note
Safety guard
Check the safety of the safety
guard: Does the tool stop ro-
tating when the guard is tilted/
removed?
Regularly
If the tool does not immediately
stop rotating on tilting/removal
of the guard, the machine must
not be used.
Call the engineer
Emergency stop
Test the emergency stop: Does
the tool stop rotating when the
emergency stop is activated?
Regularly
If the tool does not immediately
stop rotating on activation of the
emergency stop, the machine
must not be used.
Call the engineer
Mixer head
The mixer head should only be
lubricated on repair, see the
section “Lubrication and grease
types”.
During repairs
The machine’s other
moving parts
The moving parts that belong
to the bowl’s lifting mechanism
all run in maintenance-free
plain bearings and should not
therefore be lubricated.
Never
Attachment drive
The rubber plug for covering
the opening of the attachment
drive should be on the machine
and be intact.
Daily
The rubber plug must cover the
opening on the attachment drive
when the latter is not in use.
Cleaning
Follow the instructions in the
section “Cleaning”
Follow the instructions
in the section “Clea-
ning”
s
ystematic
maintenance
:
Содержание Kodiak 30 VL-1C
Страница 16: ...16...
