Metos CBW 10W, Руководство пользователя, Страница: 49 / 71

13.5.2011 Rev. 2.2
Operation instructions
43
Show temperature (menu 4-1)
You can replace the tap symbol with the actual hot
water temperature with this function. The display is
set to show the tap symbol as standard.
Select the required choice and confirm your changes
with the START button
or go back without sav-
ing any changes by pressing the STOP button .
Temperature (menu 4.2)
You can change the water temperature of the hot
water system with this function.
The temperature is set at 90°C as standard. The set-
tings scope is 60-97 °C (in steps of 1 °C).
Select the required choice and confirm your changes
with the START button
or go back without sav-
ing any changes by pressing the STOP button .
Switching on the continuous heating function
97°C+
As well as the 97°C setting there is also an extra
97°C+ setting. With this setting the boiler keeps on
heating for a while* after reaching 97°C in order to
make better water for tea. The continuous heating
function only works when hot water has been drawn
off and more fresh water has been added. (* CB5W
50 sec. , CB10-20W 100 sec.).
Hot water system descale indicator settings (menu
4.3)
Before you start using the appliance you must first
set the descale indicator.
• The default descale indicator is set to 1000 li-
tres (average water hardness) and has a scope
of 0 to 9999 litres in steps of 100
• Use the table 5 below and select the relevant
water hardness for you. In the right column
you can read after how many litres (recom-
mended) the system must be descaled.
• Once the set amount of litres has been
reached a spanner symbol will appear in the
display. The appliance will continue to work
normally so that descaling can be done at a
more suitable time.