Metos CBW 10W, Руководство пользователя, Страница: 19 / 71

13.5.2011 Rev. 2.2
Operation instructions
13
4. Operation instructions
4.1 Before using the appliance
When used for the first time the appliance works according to the standard factory set-
tings.
The various settings can be altered by trained, authorized personnel. See “Operator
menu”.
This chapter will explain the coffee brewing and hot water system process.
• when the appliance is used for the first time.
• when the appliance has not been used for more than 1 week, for example after a
holiday period.
4.1.1 Flushing the flow heater system
1. Open the water tap and check if the swivel connections are not leaking.
2. Put the cable with inlet plug into the back of the container and insert the plug into
the socket of the flow water heater (fig. 1-1).
3. Check if the containers are positioned correctly, with a filter unit (still without cof-
fee), and position the swivel arm above the centre of the filter.
4. Switch the appliance on by putting the ON/OFF switch (fig. 1-2) in position I, the
display (fig. 1-5.2)lights up and you will hear a beeping sound. Then the display
will indicate the standard choices.
5. Press selection button 2 (fig. 1-5.4) and confirm your choice by pressing the
START button (fig. 1-5.7). The coffee system starts filling and the brewing proc-
ess starts. In the display appears the text: BREWING. With the STOP button
(fig.1-5.1) the brewing process can be interrupted at any moment. When the wa-
tersupply stops coming out of the swivel arm, you will hear a beeping sound (1x
short). In the display appears the text: LEAKING. The leaking time is set as stand-
ard to approx. 5 minutes, and its ending is indicated by a beeping sound (3x short).
6. Empty the container with the drainage tap (fig. 1-15).
7. Position the swivel arm above the other filter and follow the above procedure once
again if the model is equipped with two containers.
8. Once the container is empty the coffee maker is ready for use.