Metos CBW 10W, Руководство пользователя, Страница: 27 / 71

13.5.2011 Rev. 2.2
Operation instructions
21
4.2.5 Drawing off hot water [5W, 10W, 20W]
The appliance comes with a separate hot water
system with a no-drip tap (A) through which it is
possible to draw off hot water during the coffee
brewing process.
The hot water system steam outlet can be found
on the top of the column (B). Steam can escape
through this opening during normal heating and
during heating with the continuous heating func-
tion (97°C+) switched on! Do not touch the mois-
ture outlet. There is a risk of burning.
1. Press the hot water system on/off button
(B). The hot water system fills automatically,
before heating up. A flashing tap symbol ap-
pears in the display (A).
2. The tap symbol stops flashing when the hot wa-
ter system is hot enough.
3. The hot water system is now ready for use.
• The hot water temperature is set to 90°C as
standard.
• The hot water system can be switched off at
any moment by pressing the on/off button
again (B). The tap symbol disappears on the
display and the system will no longer refill or
heat up.
• If a large amount of hot water is drawn off the
boiler fills and heats in charges of approx. 0.75
litres. This means you have (some) hot water
again in a short time.
Have you not used the appliance for more than 1 week? If so, use the appliance as de-
scribed in chapter “Before using the appliance”. After carrying out these actions the whole
hot water system has been refreshed. This all contributes to the provision of good quality
coffee and/or hot water.