Metos CBW 10W, Руководство пользователя, Страница: 33 / 71

13.5.2011 Rev. 2.2
Operation instructions
27
Display: 4/5 Rinse. Press Start .
Press the START button to start the 2nd rinsing cycle.
Display: 4/5 Rinse. Please wait.The coffee maker will heat up.
The container will be filled with 2 litres. There will be 2 beep-
ing signals after the 2nd rinsing cycle.Display: 4/5 Empty con-
tainer. Press Start
.
Once the container is empty press the START button .
Display: 5/5 Rinse. Press Start .
Press the START button to start the 3rd rinsing cycle.
Display: 5/5 Rinse. Please wait.The coffee maker will heat up.
The container will be filled with 2 litres. There will be 3 beep-
ing signals after the 3rd rinsing cycle.
Display: 5/5 Empty container. Press Start .
Once the container is empty press the START button .
The descaling program is now complete and the descaling
menu will reappear in the display. The flow counter will automatically be reset to the start-
ing value. Exit the menu by pressing the STOP button
twice, or select another menu
function.
Hot water counter menu (Menu 1.2)
After activating the hot water counter 1.2 you can read how many litres away from a hot
water signal the coffee maker is.
Start descaling menu for hot water system (Menu 1.3)
Preparation
• Read the warnings and user guide on the sachets of the Animo scale remover first.
• Dissolve 2 x 50g sachets of Animo scale remover in 1 litre of warm water (60°C).
Stir the solution thoroughly so that the powder is completely dissolved.
• Follow the instructions shown on the display and confirm each action with .
The hot water system must be drained completely empty a number of times during the
descaling procedure. Use the drainage hose from under the foot plate for this (fig. 1-23).
If necessary turn the furthest away closing tap open carefully and let water run in to one
bucket. Careful; the water is hot!