Metos CBW 10W, Руководство пользователя, Страница: 18 / 71

13.5.2011 Rev. 2.2
Functional description
12
3.7 Display
3.8 Error reporting symbols
I Boiler systemThe hot water system is switched
on. The tap symbol can be replaced by the actu-
al boilertemperature display via the operator
menu.
J Brew volume (4x)Each selection button (4x)
displays a pre-programmed brewing amount.
The amountscan be set completely as required
via the settings menu.
K ClockReal time indicator
L Timer; (flashing)The timer function is activat-
ed.
M Scale indicatorOne of the systems must be des-
caled at the first opportunity. Look up 'descal-
ing' in theoperator menu.
N Swivel arm in positionThe swivel arm is in the
correct position above a filter. If the swivel arm
is moved away the symbol disappears from the
display.
O Container in positionThe coffee container with
filter unit is in the correct position. If the con-
tainer is taken away the symbol disappears from
the display.
P Container heatingThe heating of the coffee con-
tainer is switched on. If the heating is switched
offthe symbol disappears from the display.
Q Leaking outThe dripping symbol is displayed if
the hot water dosing is stopped and the filter
unit is leaking.
Container position failureThis symbol appears in the display if the coffee container gets out of
position during a brewing process. The arrow shows on which side the problem occurs.
Swivel arm not in positionThis symbol appears in the display if the swivel arm gets out of position
during a making process. The arrow shows on which side the problem occurs.
Swivel arm not in position for new brewing process This symbol appears in the display if a brew-
ing process is started and there is (still) no swivel arm in position above the filter unit.
Press START buttonThis symbol appears after the swivel arm and/or container fault has been re-
solved. For your own safety the start button must always be pressed again. If this report is re-
sponded to within 10 minutes the brewing process will restart and be completed.
If the START button is pressed only after 10 minutes, a cross symbol with a flashing clock ap-
pears in order to indicate that the brewing process can no longer be restored and should be con-
sidered lost.