Metos CBW 10W, Руководство пользователя, Страница: 37 / 71

13.5.2011 Rev. 2.2
Operation instructions
31
The program can be cancelled at any time un-
til the solution is poured in. Once the solution
has been poured in, the program must always
be completed. In case of an emergency stop,
the STOP button can always be used. The
program will then stop, but not be finished.
• Remove the cap from the descaling
opening left of the swivel arm.
• Insert the descaling funnel (A) into the
descaling opening. Push the funnel
downward as far as possible.
• Slowly pour the scale remover into the
funnel. The scale remover will enter
the boiler element by the supply pipe
and will come out of the swivel arm as
foam.
• Repeat the procedure described above
if there is a grat amount of foam.
• Press the START button to con-
tinue the programm.
Display: 2/5 <- funnel left. Pour solution
through. Ready? Press start
.
The program is now ready to flush the system
3 times, so that the remaining scale remover can be removed from the heating system. Re-
move the funnel and replace the cap. Remove the plastic container with the collected scale
remover and replace the filter.
Display: 2/5 Remove funnel. Place filter. Press Start
Display: 3/5 Rinse. Press Start .
Press the START button to start the 1st rins cycle.
Display: 3/5 Rinse. Please wait.The coffee maker will heat up.
The container will be filled with 2 litres. There will be 3 beep-
ing signals after the 1st rinsing cycleDisplay: 3/5 Empty con-
tainer. Press Start
.Once the container is empty press the
START button .