METER ATMOS 41W, Руководство пользователя

Страница: 35 / 76

31
ATMOS 41W
3. Twist counter-clockwise to unlock from the ATMOS 41W base until the lock/unlock
graphic located on the side of the rain gauge funnel is lined up with the notch on the
interface plate (
Figure 15 ).
4. Carefully lift off the rain funnel.
CAUTION
Remove the rain funnel carefully to avoid damaging the pyranometer connector wire.
Push
down
Pull
up
Rotate
Figure 15 Removing ATMOS 41W rain funnel
3.2.2.2 DISCONNECT PYRANOMETER AND RAIN FUNNEL
Before removing the rain funnel completely, carefully disconnect the pyranometer from the
ATMOS 41W base by disconnecting the pyranometer connector as described below and
shown in
Figure 16 .
1. Press in the tabs on both sides of the connector locking mechanism with a sharp-
pointed object (e.g., a ballpoint pen).
2. Once the tabs are released, pull the connectors apart.
3. Place the rain funnel aside.
IMPORTANT
Unplug the pyranometer connector inside the rain funnel before fully removing the funnel ( Figure 16 ).