Thermal Imaging Camera
Installation Guide
LWIR
5- 12
5.9 Selecting a Colour Palette
The LWIR Web Server has a range of colour/greyscale palettes
available.
You can select which colour/greyscale give you the best results
for your particular application.
1) To select a palette, click on the colour/greyscale to the right
of the thermal image.
A pop-up window displays the range of available palettes.
2) Click on the required palette to activate it.
The thermal image is displayed using the new palette.
5.10 Adjusting the Temperature Span
By default, the LWIR Web Server colour/greyscale palette covers
the entire temperature range of your LWIR Thermal Imaging
Camera - either 0 to 500°C, or 100 to 1000 °C. However, your
application may have temperatures which are well within these
lower and upper limits.
You can adjust the temperature measurement span limits as
follows:
1) On the grey vertical bar to the left of the palette, drag the
upper and lower temperature limit setting boxes to match
the temperature span you want to measure e.g. 200 to
400 °C.
The values displayed at the top and bottom of the palette
are adjusted to match your span settings, and the thermal
image will be updated to use these values.
2) You can also use the
Autoscale
feature, which will
automatically adjust the measurement span limits to
match the highest and lowest temperatures measured in
the thermal image.
Содержание LAND LWIR
Страница 47: ......