Metek LAND LWIR, Руководство по установке

Страница: 10 / 48

Thermal Imaging Camera
Installation Guide
LWIR
3- 2
Fig. 3-3
3) Grip the rear section of the input connector
and unscrew it from the Power Supply Unit
(Fig. 3-3).
Fig. 3-4
Fig. 3-6
The connection terminals inside the input
connector will now be revealed (Fig. 3-4).
4) Unscrew the connector front section from
the Power Supply Unit and disassemble
the remaining parts of the connector.
5) Slide the rear locking ring, gasket and
shell body over the mains input cable.
6) Strip back the mains cable wires to the
appropriate lengths and connect them to
the Input connector terminals (Fig. 3-5)
as per the wiring schedule below:
Pin 1 = Live
Pin 2 = Neutral
Pin 3 = N/C
E = Earth
7) The mains input cable connector is now
ready for re-assembly and connection to
the Power Supply Unit (Fig. 3-6). Re-
assemble the mains input connector.
Fig. 3-5