Metek LAND LWIR, Руководство по установке

Страница: 31 / 48

5 - 3
LWIR Thermal Imaging Camera
Installation Guide
5.2 About the Web Server Interface
A typical Web Server Interface is show in Fig. 5-2.
Fig. 5-2 Typical Web Server Interface
Item Description
1 Thermal image (live image from LWIR)
2 IP Address of Web Server
3 Frame settings summary details
4 Regions of Interest (ROI) controls and summary details.
Up to three ROIs are available. See sections 5.6 and 5.7.
5 LWIR camera summary details
6 Web Server menu. See section 5.3
7 Colour/Greyscale of temperature range (Palette). Choice of six Palettes
available.
8 Temperature measurement span (user-adjustable). Upper and lower limits
can be set to any points within measurement range of LWIR.
9 Full screen ON/OFF control
10 Save Camera Settings. Allows you to save any changes to the settings of the
LWIR Thermal Imager.
11 Load Camera Settings. Allows you to upload previously saved settings into
the LWIR Thermal Imager.
5.2.1 Web Server Interface Password
The Password prompt will appear whenever:
•
Any Settings button other than the Info button is pressed, or
• Any Region of Interest (ROI) is switched On or Off
The default Password is 123456 .
The Password protection can be switched on or off, and the Password changed,
in the Settings menu (See section 5.4).
1
2
3
4
5
6
7
8
9
10 11