10
OPERATION MANUAL
3.4 CHANGING DIES
The Bead Roller comes with a variety of bead and flange dies, as well as the cutting dies &
plates. (assembled to the machine before shipping) Use the following instructions when you
change dies.
Removing the Cutting Dies and Plates
1. Loosen Handle(39#), See Figure 7.
2. Using a Hex Key Wrench, remove the two socket head cap screws (30#) securing the
Cutting Dies (10#-01,10#-02) to the Driving Shaft (3#) and Driven Shaft (4#). Remove the
Washers (13#).
3. Using a Hex Key Wrench(27#), loosen the Screws( 16#) that lock the Cutting Dies (10#-
01,10#-02) onto the shafts. See Figure 7.
4. Remove the Cutting Dies (10#-01,10#-02).
It may be necessary to sharpen or replace the Cutting Plates (9#) from the Dies (10#-1, 10#-2)
To Remove the Cutting Plates from the Dies
1. Using a hex key wrench, remove the eight Screws(18#) and Spring Washers(25#), securing
the Cutting Plates (9#) to the Cutting Dies(10#-01, 10#-02). See Figure 7.
3. Remove the Cutting Plates (9#).
1/4” B
ead
(6.35
mm
)
3/8” B
ead
(9
mm
)
1/2” B
ead
(12.7
mm
)
1/16”S
tepped
(1.6
mm
)
1/8” S
tepped
(3
mm
)
1/4” S
tepped
(6.35
mm
)
Bead and Stepped Dies
F
ig
. 7
4#
3#
16#
10#-01
30#
9#
18#
25#
10#-02
13#
39#
06/01/2020
Instructions Manual for SJ-24D (S641)
10
