14
OPERATION MANUAL
3.6 ATTACHING THE ACCESSORIES
q
Bolt on the two apron safety guards (Fig 3.4)
F
ig
. 3.4
F
ig
. 3.6
F
ig
. 3.5
Before the machine is operated the accessories need to be assembled and mounted onto the
machine. The following accessories need to be fitted
NOTE:
the machine must not be used unless the safety guards have been installed correctly.
q
Connect the roving foot pedal to the machine by insert-
ing the two control cables and locked in by screwing the
securing cap on to the plug. (Fig. 3.5)
q
Install the manual back gauge making
sure that the packing blocks are in place to
raise the back gauge to the correct height
(Fig. 3.6)
3.7 FILL THE HYDRAULIC OIL TANK.
To fill the tank with oil
1. Remove the oil tank cover.
2. Make sure the inside of the tank is clean and
clear of any dirt
3. Using a pump, fill the tank with oil until the level
reaches the centre mark of the oil indicator.
Observation of the oil level indicator should be
done regularly to ensure the oil is kept at the
same level.
When filling the tank with oil, make sure that
the top of the tank is clean and free from dust
and dirt.
F
ig
. 3.7
Oil Level Indicator
22/07/2019
Instructions Manual for PB-422L (S576)
14
