9
OPERATION MANUAL
2.2 SAFETY SPECIFIC TO PANBRAKES
DO NOT use this machine unless you have been instructed
in its safe use and operation or have read and understood this manual.
PERSONAL PROTECTIVE EQUIPMENT
Safety glasses must be
worn at all times in work
areas
Long and loose hair must
be contained.
Gloves must not be worn
when using this machine.
Sturdy footwear must be
worn at all times in work
areas
Close fitting/protective
clothing must be worn
Rings and jewelery must
not be worn.
PRE-OPERATIONAL SAFETY CHECKS
Locate and ensure you are familiar with all machine operations and controls.
Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or
faulty.
Ensure working parts are well lubricated and the jaws and fingers free of rust and dirt.
Check workspaces and walkways to ensure no slip/trip hazards are present
Be aware of other people in the area. Ensure the area is clear before using equipment.
OPERATIONAL SAFETY CHECKS
Remove the pan brake fingers that are in the way. Use only the pan brake fingers required
to make the bend.
Ensure the pan brake fingers that are not removed for an operation are securely seated and
firmly tightened before the machine is used.
Ensure your fingers and limbs are clear before operating the pan brake.
Lower finger clamps to work. Do not drop.
Check workpiece is secure.
Keep clear of moving counterweight (where fitted).
ENDING OPERATIONS AND CLEANING UP
Lower finger clamps to a safe position.
Return all accessories to storage racks.
Leave the work area in a safe, clean and tidy state.
POTENTIAL HAZARDS AND INJURIES
Sharp edges and burrs.
Squash/crush and pinch points.
Impact from counterweight.
DON’T
Do not use faulty equipment. Immediately report suspect machinery.
Do not use a pan brake for bending metal that is beyond its capacity for thickness, shape or
type.
Do not attempt to bend rod, wire, strap or spring steel sheets.
22/07/2019
Instructions Manual for PB-422L (S576)
9
